Grounding the Device

The procedure below describes how to ground the device.

Protective Earthing

The equipment is classified as Class I according to EN-60950-1 and UL 60950-1 and must be earthed at all times (using an equipment-earthing conductor).

● Finland: "Laite on liltettava suojamaadoituskoskettimilla varustettuun pistorasiaan."
● Norway: "Apparatet rna tilkoples jordet stikkontakt."
● Sweden: "Apparaten skall anslutas till jordat uttag."
➢ To ground the device:
1. Connect an electrically earthed strap of 16 AWG wire (minimum) to the chassis' earthing screw (located on the rear panel), using the supplied washer.

Grounding the Device

m1k_cabling_earthing.png

2. Connect the other end of the strap to a protective earthing. This should be in accordance with the regulations enforced in the country in which the device is installed.